Par Specialty Polymers

:: CONSTRUCTION CHEMICAL

PARPLAST-RC 275	PARPLAST-RC 230S	PARPLAST-RCP	PARPLAST - CS 225
PARPLAST - HG 210	PARPLAST – SC 240	PARPLAST-SC 299	PARGLEN
PARPLAST - RH 215	PARPLAST	PARPLAST 35	PARPROOF
PARPOL	PARJOINT	PARJOINT 740	PARCURE – 200
PARSHINE	PARCLEAN – R	PARCOAT – S	PARCRETE J 540
PARCRETE - A 440	PARMICRO

PARCOAT-S
For Protective Coating of Steel Reinforcement in Repair Work
PARCOAT–S, a polymer based formulation forms a strong film on steel surface. This inhibits rusting and bonds well with concrete.
APPLICATIONS
For coating of reinforcement bars especially in repairs. For protection of marine structures and buildings in saline and corrosive environment. For encased steel members in industrial buildings, high tensile wires/ strands/ cables as in pre-stressed concrete section
ADVANTAGES
Total protection to all embedded steel members. Helps in good bonding of steel and concrete. Provides effective barrier to water and other corrosive elements. Easy to apply with a regular paint brush
CHARACTERISTICS
State : Liquid Colour :Green
GUIDELINES FOR USE
Remove the rust from the steel surface using a wire brush followed by a treatment of PARCLEAN-R (Please see PARCLEAN–R data sheet). Mix PARCOAT-S with cement in 1:1 ratio by weight to form a consistent slurry. Apply this mixture on the steel surface with a brush. Allow the coating to dry for 6 – 8 hrs. Apply second coat to ensure that all pin holes are eliminated. Allow the second coat to dry for 6 – 8 hrs before proceeding further
The treated area is further repaired using PARCRETE-J OR PARCRETE-A bond coat followed by cement mortar modified with PARCRETE-J or PARCRETE-A to build up the new concrete layer by layer. (Please see PARCRETE-J or PARCRETE-A data sheets) PARCOAT–S covers about 80 sq. ft / coat / kg of steel surface.
STORAGE	:	Stable under normal conditions. Should be stored away from direct sunlight.
HANDLING	:	Use of gloves and safety glasses is recommended.
PACKING	:	Available in1 kg, 5 kg, 10 kg and 20 kg.